
Command Line Interface
Command Mode
Global Configuration
Command Usage
•Ethernet and WDS user names and passwords must be set before enabling the 802.1x supplicant feature for the specified port.
•The access point currently only supports
Example
AP(config)#802.1x supplicant wds_user 1 David
AP(config)#802.1x supplicant wds_password 1 ABC
AP(config)#802.1x supplicant wds 1
AP(config)#
address filter default
This command sets filtering to allow or deny listed MAC addresses.
Syntax
address filter default <allowed denied>
•allowed - Only MAC addresses entered as “denied” in the address filtering table are denied.
•denied - Only MAC addresses entered as “allowed” in the address filtering table are allowed.
Default
allowed
Command Mode
Global Configuration