PPPoE Commands

Default Setting

None

Command Mode

Interface Configuration (Ethernet)

Command Usage

If the pppoe ip allocation mode is set to static, the remote IP address must be entered with this command, and the local IP address must be entered with the pppoe local ip command.

Example

AP#(if-ethernet)#pppoe remote ip 192.168.1.20

AP#

Related Commands

pppoe ip allocation mode (page 7-82) pppoe local ip (page 7-86)

pppoe username

This command sets the user name for the PPPoE tunnel.

Syntax

pppoe username <username>

username - User name assigned by the service provider. (Range: 1-63 alphanumeric characters)

Default Setting

None

Command Mode

Interface Configuration (Ethernet)

7-87

Page 257
Image 257
SMC Networks 2.4GHz/5GHz manual Syntax Pppoe username username