SMC Networks 2.4GHz/5GHz manual Command Groups

Command Groups

Command Groups

The system commands can be broken down into the functional groups shown below.

Command	Description	Page
Group
General	Basic commands for entering configuration	7-10
	mode, restarting the system, or quitting the
	CLI
System	Controls user name, password, browser	7-15
Management	management options, and a variety of other
	system information
System Logging	Configures system logging parameters	7-23
System Clock	Configures SNTP and system clock settings	7-28
SNMP	Configures community access strings and	7-34
	trap managers
Flash/File	Manages code image or wireless bridge	7-39
	configuration files
RADIUS	Configures the RADIUS client used with	7-45
	802.1x authentication
Authentication	Configures IEEE 802.1x port access control	7-49
	and address filtering
WDS	Configures the Wireless Distribution System	7-61
	forwarding table
Bridge	Configures MAC address table aging time	7-65
	settings and spanning tree parameters
Filtering	Filters access to the management interface	7-76
	from wireless nodes, and filters traffic using
	specific Ethernet protocol types
PPPoE	Configures parameters for a PPPoE	7-80
	management tunnel on the Ethernet interface
Ethernet	Configures connection parameters for the	7-91
Interface	Ethernet interface
Wireless	Configures connection parameters for the	7-97
Interface	wireless interface

7-9