Command Line Interface

SNMP Commands

Controls access to this wireless bridge from management stations using the Simple Network Management Protocol (SNMP), as well as the hosts that will receive trap messages.

Command

Function

Mode

Page

 

 

 

 

snmp-server

Sets up the community access string

GC

7-34

community

to permit access to SNMP commands

 

 

 

 

 

 

snmp-server

Sets the system contact string

GC

7-35

contact

 

 

 

 

 

 

 

snmp-server

Enables SNMP service and traps

GC

7-36

enable server

 

 

 

 

 

 

 

snmp-server host

Specifies the recipient of an SNMP

GC

7-37

 

notification operation

 

 

 

 

 

 

snmp-server

Sets the system location string

GC

7-38

location

 

 

 

 

 

 

 

show snmp

Displays the status of SNMP

Exec

7-39

 

communications

 

 

 

 

 

 

snmp-server community

This command defines the community access string for the Simple Network Management Protocol. Use the no form to remove the specified community string.

Syntax

snmp-server community string [ro rw] no snmp-server community string

string - Community string that acts like a password and permits access to the SNMP protocol. (Maximum length: 23 characters, case sensitive)

ro - Specifies read-only access. Authorized management stations are only able to retrieve MIB objects.

rw - Specifies read/write access. Authorized management stations are able to both retrieve and modify MIB objects.

7-34

Page 204
Image 204
SMC Networks 2.4GHz/5GHz manual Snmp Commands, Snmp-server community