![](/images/new-backgrounds/1108750/108750201x1.webp)
Advanced Configuration
CLI Commands for 802.1X Authentication – Use the 802.1X supported command from the global configuration mode to enable 802.1X authentication. Set the session and broadcast key refresh rate, and the
AP(config)#802.1X supported |
| ||
AP(config)#802.1X | |||
AP(config)#802.1X | |||
AP(config)#802.1X | |||
AP(config)#exit |
|
|
|
AP#show authentication |
|
| |
Authentication Information |
|
| |
========================================================= |
| ||
MAC Authentication Server | : REMOTE |
| |
MAC Auth Session Timeout Value : 300 secs |
| ||
802.1X |
| : SUPPORTED |
|
Broadcast Key Refresh Rate | : 5 min |
| |
Session Key Refresh Rate |
| : 5 min |
|
802.1X Session Timeout Value | : 300 secs |
| |
Address Filtering |
| : DENIED |
|
System Default : DENY addresses not found in filter table. |
| ||
Filter Table |
|
|
|
MAC Address | Status |
|
|
| |||
DENIED |
|
| |
ALLOWED |
|
|
=========================================================
AP#