SMC Networks 2.4GHz/5GHz manual Remote

System Configuration

CLI Commands for RADIUS MAC Authentication – Use the mac-authentication server command from the global configuration mode to enable remote MAC authentication. Set the timeout value for re-authentication using the mac-authenticationsession-timeoutcommand. Be sure to also configure connection settings for the RADIUS server (not shown in the following example). To display the current settings, use the show authentication command from the Exec mode.

AP(config)#mac-authentication server remote			7-59
AP(config)#mac-authentication session-timeout 300			7-60
AP(config)#exit
AP#show authentication			7-60
Authentication Information
=========================================================
MAC Authentication Server		: REMOTE
MAC Auth Session Timeout Value : 300 secs
802.1X		: DISABLED
Broadcast Key Refresh Rate		: 5 min
Session Key Refresh Rate		: 5 min
802.1X Session Timeout Value		: 300 secs
Address Filtering		: DENIED
System Default : DENY addresses not found in filter table.
Filter Table
MAC Address	Status
-----------------	----------
00-70-50-cc-99-1a	DENIED
00-70-50-cc-99-1b	ALLOWED

=========================================================

AP#

6-24