Hardware Installation

Mounting on Larger Diameter Poles

In addition, there is a method for attaching the pole-mounting bracket to a pole that is 2 to 5 inches in diameter using an adjustable steel band clamp (not included in the kit). A steel band clamp up to 0.5 inch (1.27 cm) wide can be threaded through the main part of the bracket to secure it to a larger diameter pole without using the U-shaped part of the bracket. This method is illustrated in the following figure.

Steel Band Clamp

Using the Wall-Mounting Bracket

Perform the following steps to mount the unit to a wall using the wall-mounting bracket:

Note: The wall-mounting bracket does not allow the wireless bridge’s intrgrated antenna to be aligned. It is intended for use with the unit using an external antenna.

1.Always attach the bracket to a wall with the open end of the mounting grooves facing up (see following figure).

4-4

Page 56
Image 56
SMC Networks 2.4GHz/5GHz manual Using the Wall-Mounting Bracket, Mounting on Larger Diameter Poles