![](/images/new-backgrounds/1108750/108750281x1.webp)
Radio Interface
stop sending the SSID in beacon messages. Select a radio channel or set selection to Auto using the channel command. Set any other parameters as required. To view the current 802.11g radio settings, use the show interface wireless g command.
AP(config)#interface wireless g | ||
Enter Wireless | configuration commands, one per line. |
|
g)#description | ||
g)#ssid r&d |
| |
g)#channel auto | ||
g)#speed 6 | ||
g)#exit |
| |
AP#show interface wireless g |
|
Wireless Interface Information
===========================================================
| |||
Description | : Enterprise 802.11g Wireless Outdoor | ||
Bridge/AP |
|
|
|
Service Type | : Access Point |
| |
SSID | : r&d |
|
|
Channel | : 11 (AUTO) |
| |
Status | : Enable |
| |
| |||
Transmit Power | : FULL (14 dBm) |
| |
Max Station Data Rate | : 6Mbps |
|
|
Fragmentation Threshold | : 512 bytes |
| |
RTS Threshold | : 256 bytes |
| |
Beacon Interval | : 150 TUs |
| |
DTIM Interval | : 5 beacons |
| |
Maximum Association | : 64 stations |
| |
|
| ||
Closed System | : DISABLED |
| |
Multicast cipher | : WEP |
|
|
Unicast cipher | : TKIP |
|
|
WPA clients | : SUPPORTED |
| |
WPA Key Mgmt Mode | : DYNAMIC |
| |
WPA PSK Key Type | : HEX |
|
|
Encryption | : DISABLED |
| |
Default Transmit Key | : 1 |
|
|
Static Keys : |
|
|
|
Key 1: EMPTY Key 2: EMPTY | Key 3: EMPTY | Key 4: EMPTY | |
Authentication Type | : OPEN |
|
|
===========================================================
AP#