SMC Networks 2.4GHz/5GHz manual Key, No key wep index wdsaes

Command Line Interface

key

This command sets the keys used for WEP and AES encryption. Use the no form to delete a configured key.

Syntax

key {wep <index size type wep-value> wdsaes <port-id aes-value>}

no key {wep <index> wdsaes}

•wep - The keyword that specifies a WEP encryption key.

–index - Key index. (Range: 1-4)

–size - Key size. (Options: 64, 128, or 152 bits)

–type - Input format. (Options: ASCII, HEX)

–wep-value- The WEP key string. For ASCII input, use 5/ 13/16 alphanumeric characters for 64/128/152 bit keys. For HEX input, use 10/26/32 hexadecimal digits for 64/ 128/152 bit keys.

•wdsaes - The keyword that specifies an AES encryption key

–port-id- The ID for the wireless port on the bridge. For Slave units, the ID is 1. For Master units, the ID can be from 1 to 16.

–aes-value- The AES key string. For alphanumeric input, use 8 to 31 characters. For hexadecimal input, use exactly 32 digits.

Default Setting

None

Command Mode

Interface Configuration (Wireless)

Command Usage

•To enable WEP encryption, use the encryption command to specify the key type and length, and use the key command to configure at least one key.

7-112