SMC Networks 2.4GHz/5GHz manual Upgrading Firmware

System Configuration

CLI Commands for the User Name and Password – Use the username and password commands from the CLI configuration mode.

AP(config)#username bob	7-19
AP(config)#password spiderman	7-20
AP#

Upgrading Firmware

You can upgrade new wireless bridge software from a local file on the management workstation, or from an FTP or TFTP server.

After upgrading new software, you must reboot the wireless bridge to implement the new code. Until a reboot occurs, the wireless bridge will continue to run the software it was using before the upgrade started. Also note that rebooting the wireless bridge with new software will reset the configuration to the factory default settings.

Note: Before upgrading your wireless bridge software, it is recommended to save a copy of the current configuration file. See “copy” on page 7-41 for information on saving the configuration file to a TFTP or FTP server.

6-34