Command Line Interface
7-104beacon-interval
This command configures the rate at which beacon signals ar e
transmitted from the wireless bridge.
Syntax
beacon-interval <interval>
interval - The rate for transmitting beacon signals.
(Range: 20-1000 milliseconds)
Default Setting
100
Command Mode
Interface Configuration (Wireless)
Command Usage
The beacon signals allow remote bridges t o maintain contact
with the local wireless bridge. They may also carry
power-management information.
Example
dtim-period
This command configures the rate at which remote bridges in
sleep mode must wake up to receive broadcast/multicast
transmissions.
Syntax
dtim-period <interval>
interval - Interval between the beacon frames that transmit
broadcast or multicast traffic. (Range: 1-255 beacon frames)
AP(if-wireless a)#beacon-interval 150
AP(if-wireless a)#