Introduction
System Defaults
The following table lists some of the wireless bridge’s basic system defaults. To reset the bridge defaults, use the CLI command “reset configuration” from the Exec level prompt.
Feature | Parameter | Default |
|
|
|
Identification | System Name | Dual Band Outdoor |
|
| AP |
|
|
|
Administration | User Name | admin |
|
|
|
| Password | smcadmin |
|
|
|
General | HTTP Server | Enabled |
|
|
|
| HTTP Server Port | 80 |
|
|
|
TCP/IP | IP Address | DHCP |
|
|
|
| Subnet Mask | 255.255.255.0 |
|
|
|
| Default Gateway | 0.0.0.0 |
|
|
|
| Primary DNS IP | 0.0.0.0 |
|
|
|
| Secondary DNS IP | 0.0.0.0 |
|
|
|
VLANs | Status | Disabled |
|
|
|
| Native VLAN ID | 1 |
|
|
|
Filter Control | Ethernet Type | Disabled |
|
|
|
