![](/images/new-backgrounds/1108750/108750329x1.webp)
Status Information
•Radio Authentication Type: Shows the bridge is set as an open system.
•802.1X: Shows if IEEE 802.1X access control for wireless clients is enabled.
CLI Commands for Displaying System Settings – To view the current wireless bridge system settings, use the show system command from the Exec mode. To view the current radio interface settings, use the show interface wireless a command (see page
AP#show system | ||
System Information |
| |
============================================================ | ||
Serial Number | : . | |
System Up time | : 0 days, 5 hours, 2 minutes, 4 seconds | |
System Name |
| : Dual Band Outdoor AP |
System Location | : | |
System Contact | : Contact | |
System Country Code : US - UNITED STATES | ||
MAC Address |
| : |
IP Address |
| : 192.168.2.2. |
Subnet Mask |
| : 255.255.255.0 |
Default Gateway | : 0.0.0.0 | |
VLAN State |
| : DISABLED |
Native VLAN | ID | : 1 |
IAPP State |
| : ENABLED |
DHCP Client |
| : ENABLED |
HTTP Server |
| : ENABLED |
HTTP Server | Port | : 80 |
Slot Status |
| : Dual band(a/g) |
Software Version | : v1.1.0.0B07 |
============================================================
AP#