SMC Networks 2.4GHz/5GHz manual System Identification, Rssi

System Configuration

Menu	Description	Page
RSSI	Controls the maximum RSSI voltage output	6-54
	for specific WDS ports
Radio Interface A	Configures the IEEE 802.11a interface	6-56
Radio Settings	Configures radio signal parameters, such as	6-57
	radio channel, transmission rate, and
	beacon settings
Security	Configures data encryption using Wired	6-66
	Equivalent Protection (WEP) or Wi-Fi
	Protected Access (WPA)
Radio Interface G	Configures the IEEE 802.11b/g interface	6-63
Radio Settings	Configures radio signal parameters, such as	6-63
	radio channel, transmission rate, and
	beacon settings
Security	Configures data encryption using Wired	6-66
	Equivalent Protection (WEP) or Wi-Fi
	Protected Access (WPA)

System Identification

The system information parameters for the wireless bridge can be left at their default settings. However, modifying these parameters can help you to more easily distinguish different devices in your network.

The wireless bridge allows the selection of the band to be used for bridge links. The bridge band can support no wireless clients. Alternatively, bridging can be disabled and both bands can support access point functions.

6-4