SMC Networks 2.4GHz/5GHz manual +8 TAIPEI, Beijing

System Configuration

CLI Commands for SNTP – To enable SNTP support on the wireless bridge, from the global configuration mode specify SNTP server IP addresses using the sntp-server ip command, then use the sntp-server enable command to enable the service. Use the sntp-server timezone command to set the location time zone and the sntp-serverdaylight-savingcommand to set up a daylight saving. To view the current SNTP settings, use the show sntp command.

AP(config)#sntp-server		ip 10.1.0.19	7-29
AP(config)#sntp-server		enable	7-30
AP(config)#sntp-server		timezone +8	7-32
AP(config)#sntp-server		daylight-saving	7-31
Enter Daylight saving from which month<1-12>: 3
and which day<1-31>:	31
Enter Daylight saving end to which month<1-12>: 10
and which day<1-31>:	31
AP(config)#exit
AP#show sntp			7-33
SNTP Information
=========================================================
Service State	: Enabled
SNTP (server 1) IP	: 137.92.140.80
SNTP (server 2) IP	: 192.43.244.18
Current Time	:	19 : 35, Oct 10th, 2003
Time Zone	:	+8 (TAIPEI, BEIJING)
Daylight Saving	:	Enabled, from Mar, 31th to Oct, 31th

=========================================================

AP#

CLI Commands for the System Clock – The following example shows how to manually set the system time when SNTP server support is disabled on the wireless bridge.

AP(config)#no sntp-server enable	7-30
AP(config)#sntp-server date-time	7-31

Enter Year<1970-2100>: 2003

Enter Month<1-12>: 10

Enter Day<1-31>: 10

Enter Hour<0-23>: 18

Enter Min<0-59>: 35

AP(config)#

6-42