Flash/File Commands
Default Setting
None
Command Mode
Exec
Caution: Beware of deleting application images from flash memory. At least one application image is required in order to boot the wireless bridge. If there are multiple image files in flash memory, and the one used to boot the wireless bridge is deleted, be sure you first use the bootfile command to update the application image file booted at startup before you reboot the wireless bridge.
Example
This example shows how to delete the test.cfg configuration file from flash memory.
AP#delete test.cfg
Are you sure you wish to delete this file? <y/n>:
AP#
Related Commands
bootfile (page
dir
This command displays a list of files in flash memory.
Command Mode
Exec
