SMC Networks 2.4GHz/5GHz manual Disabled

System Configuration

CLI Commands for System Identification – Enter the global configuration mode and use the system name command to specify a new system name. Use the snmp-server location and snmp-server contact commands to indicate the physical location of the wireless bridge and define a system contact. Then return to the Exec mode, and use the show system command to display the changes to the system identification settings.

AP#configure		7-10
AP(config)#system name R&D		7-19
AP(config)#snmp-server location building-1		7-38
AP(config)#snmp-server contact Paul		7-35
AP(config)#exit
AP#show system		7-22
System Information
===================================================
Serial Number	: 0000000005
System Up time	: 0 days, 0 hours, 35 minutes, 56 seconds
System Name	: R&D
System Location	: building-1
System Contact	: Paul
System Country Code : US - UNITED STATES
MAC Address	: 00-30-F1-BE-F4-96
IP Address	: 192.168.2.2
Subnet Mask	: 255.255.255.0
Default Gateway	: 0.0.0.0
VLAN State	: DISABLED
Native VLAN ID	: 1
IAPP State	: ENABLED
DHCP Client	: ENABLED
HTTP Server	: ENABLED
HTTP Server Port	: 80
Slot Status	: Dual band(a/g)
Software Version	: v1.1.0.3

===================================================

AP#

CLI Commands for Bridge Band Selection – Enter the global configuration mode and use the wds channel command to specify the bridge band.

AP#configure	7-10
AP(config)#wds channel a	7-62
AP(config)#

6-6