
System Clock Commands
degrees longitude. To display a time corresponding to your local time, you must indicate the number of hours and minutes your time zone is east (before) or west (after) of UTC.
Example
AP(config)#
show sntp
This command displays the current time and configuration settings for the SNTP client.
Command Mode
Exec
Example
AP#show sntp
SNTP Information
=========================================================
Service State | : Enabled | |
SNTP (server 1) IP | : 137.92.140.80 | |
SNTP (server 2) IP | : 192.43.244.18 | |
Current Time | : 08 | : 04, Jun 20th, 2003 |
Time Zone | : +8 | (TAIPEI, BEIJING) |
Daylight Saving | : Enabled, from Jun, 1st to Sep, 1st |
=========================================================
AP#