SMC Networks 2.4GHz/5GHz manual Dns server, Default Setting

Command Line Interface

Example

To specify the 10/100Base-TX network interface, enter the following command:

AP(config)#interface ethernet

AP(if-ethernet)#

dns server

This command specifies the address for the primary or secondary domain name server to be used for name-to-address resolution.

Syntax

dns primary-server <server-address>dns secondary-server <server-address>

•primary-server- Primary server used for name resolution.

•secondary-server- Secondary server used for name resolution.

•server-address- IP address of domain-name server.

Default Setting

None

Command Mode

Global Configuration

Command Usage

The primary and secondary name servers are queried in sequence.

Example

This example specifies two domain-name servers.

AP(if-ethernet)#dns primary-server 192.168.1.55

AP(if-ethernet)#dns secondary-server 10.1.0.55

AP(if-ethernet)#

7-92