Command Line Interface

sntp-server enable

This command enables SNTP client requests for time synchronization with NTP or SNTP time servers specified by the sntp-server ip command. Use the no form to disable SNTP client requests.

Syntax

sntp-server enable no sntp-server enable

Default Setting

Disabled

Command Mode

Global Configuration

Command Usage

The time acquired from time servers is used to record accurate dates and times for log events. Without SNTP, the wireless bridge only records the time starting from the factory default set at the last bootup (i.e., 00:14:00,

January 1, 1970).

Example

AP(config)#sntp-server enable

AP(config)#

Related Commands

sntp-server ip (page 7-29) show sntp (page 7-33)

7-30

Page 200
Image 200
SMC Networks 2.4GHz/5GHz manual Sntp-server enable