Appendix A
Troubleshooting
Check the following items before you contact local Technical Support.
1.If wireless bridge units do not associate with each other, check the following:
•Check the power injector LED for each bridge unit to be sure that power is being supplied
•Be sure that antennas in the link are properly aligned.
•Be sure that channel settings match on all bridges
•If encryption is enabled, ensure that all bridge links are configured with the same encryption keys.
2.If you experience poor performance (high packet loss rate) over the wireless bridge link:
•Check that the range of the link is within the limits for the antennas used.
•Be sure that antennas in the link are properly aligned.
•Check that there is an unobstructed radio
•Be sure there is no interference from other radio sources. Try setting the bridge link to another radio channel.
•Be sure there is no other radio transmitter too close to either antenna. If necessary, move the antennas to another location.
