SMC Networks 2.4GHz/5GHz manual System Clock Commands, Syntax Sntp-server ip 1 2 ip

System Clock Commands

sntp-server ip

This command sets the IP address of the servers to which SNTP time requests are issued. Use the this command with no arguments to clear all time servers from the current list.

Syntax

sntp-server ip <1 2> <ip>

•1 - First time server.

•2 - Second time server.

•ip - IP address of an time server (NTP or SNTP).

Default Setting

137.92.140.80

192.43.244.18

Command Mode

Global Configuration

Command Usage

When SNTP client mode is enabled using the sntp-server enable command, the sntp-server ip command specifies the time servers from which the wireless bridge polls for time updates. The wireless bridge will poll the time servers in the order specified until a response is received.

Example

AP(config)#sntp-server ip 10.1.0.19

AP#

Related Commands

sntp-server enable (page 7-30) show sntp (page 7-33)

7-29