![](/images/new-backgrounds/1108750/108750123x1.webp)
Hardware Installation
strong central main lobe and smaller side lobes. The object of the alignment process is to set the antenna so that it is receiving the strongest signal from the central main lobe.
Vertical Scan
Remote
Antenna
Horizontal Scan
Main Lobe
| Maximum | RSSI Voltage | |
RSSI |
|
|
|
Voltage |
|
| Side Lobe |
|
|
| |
|
|
| Maximum |
|
|
|
|
|
|
| |
|
|
|
|
| Maximum Signal Strength Position |
| |
| for Horizontal Alignment |
|
Maximum Signal
Strength Position for
Vertical Alignment
To align the antennas in the link using the RSSI output voltage, start with one antenna fixed and then perform the following procedure on the other antenna:
Note: The RSSI output can be configured through management interfaces to output a value for specific WDS ports. See page
1.Remove the RSSI connector cover and connect a voltmeter using a cable with a male BNC connector (not included).