SMC Networks 2.4GHz/5GHz manual Advanced Configuration

Advanced Configuration

Advanced Configuration

The Advanced Configuration pages include the following options.

Menu	Description	Page
System	Configures basic administrative and client	6-4
	access
Identification	Specifies the system name, location and	6-4
	contact information
TCP / IP Settings	Configures the IP address, subnet mask,	6-7
	gateway, and domain name servers
Radius	Configures the RADIUS server for wireless	6-10
	client authentication
PPPoE Settings	Configures PPPoE on the Ethernet interface	6-13
	for a connection to an ISP
Authentication	Configures 802.1X client authentication and	6-16
	MAC address authentication
Filter Control	Enables VLAN support and filters traffic	6-26
	matching specific Ethernet protocol types
SNMP	Controls access to this wireless bridge from	6-30
	management stations using SNMP, as well
	as the hosts that will receive trap messages
Administration	Configures user name and password for	6-33
	management access; upgrades software
	from local file, FTP or TFTP server; resets
	configuration settings to factory defaults;
	and resets the wireless bridge
System Log	Controls logging of error messages; sets the	6-38
	system clock via SNTP server or manual
	configuration
WDS	Sets the MAC addresses of other units in the	6-43
	wireless bridge network
Bridge	Sets the time for aging out entries in the	6-45
	bridge MAC address table
STP	Configures Spanning Tree Protocol	6-47
	parameters

6-3