49
Corinex ADSL2+ Wireless Gateway G Configuration
Corinex ADSL2+ Wireless Gateway G
Use the following procedures to configure the gateway for a CLIP connection.
1. From the Setup main page, click on New Connection.
The default PPPoE connection setup is displayed.
2. At the Type field select CLIP.
The CLIP connection setup page is displayed as shown below.
3. Enter a unique name for the Static connection in the Name field.
The name must not have spaces and cannot begin with numbers.
4. You can also enable Network Address Translation (NAT) and the Firewall options.
If you are unsure, leave these in the default mode.
5. Based upon the information your DSL/ISP provided, enter your assigned IP
address, Mask, ARP server, and Default Gateway.
6. Under PVC Settings, enter the values of VPI and VCI settings.
Note: Your DSL service provider or your ISP will supply these.
7. Select the quality of service (QOS); leave the default value if you are unsure or
the ISP did not provide this information.