Corinex Global ADSL2+ manual Choose a connection, Is equal to 100 percent Enable IPQoS

	Corinex ADSL+ Gateway G Configuration
Field		Definition/ Description
Choose a connection		This field allows you choose a connection from
		the list of available connections. For example
		choose a WAN connection to enable IP QoS
		for the Upstream traffic of the Modem. On
		the other hand choose the LAN connection
		(Ethernet and USB Bridged) for the down-
		stream traffic.
Low Priority weight Medium		These 2 fields will allow you to select the
priority weight		weights of the Medium and Low priority
		queues in increments of 10 percent, so that
		that the sum of the weights of these 2 queues
		is equal to 100 percent.
Enable IPQoS		This field allows you to enable/disable IP QoS
		for the chosen connection.
		Note: If IP QoS is enabled and no rules are
		defined, a default rule is applied to the con-
		nection. The default rule puts all the traffic to	62
		be transmitted in the Low Priority queue
Trusted Mode		The NSP has two primary modes of opera-
		tion with regard to queue traffic prioritization
		- Trusted and Un-trusted. This field allows you
		to choose the mode - Trusted (checked) and
		Un-trusted (Unchecked).
		In Trusted mode all the rules will be
		applied first, regardless of the setting of the
		TOS bits. After the rules have been exhausted
		the existing TOS bit settings will be honored.
		The Un-trustedmode will match first against
		all rules as in Trusted mode. The difference is
		that if there is no match then a default rule will
		be used. The default rule will have an associ-
		ated queuing priority - Low.

In case you enabled the IP QoS field, you can add detailed rules for QoS.

For adding a rule, please select the connection from the choose a connection list and click Add. The following screen will appear:

Corinex ADSL2+ Wireless Gateway G