Corinex Global ADSL2+ manual Command prompt, enter ipconfig /all. Then press Enter key

Appendices

2. In the command prompt, enter ipconfig /all. Then press Enter key.

3.Write down the Physical Address as shown on your computer screen (see previous picture); it is the MAC address for your Wireless or Ethernet adapter. This will appear as a series of letters and numbers. The MAC address/Physical

Address is what you will use for MAC Address Cloning or MAC Filtering. 141

The example on previous picture shows the IP address of your Wireless adapter as 192.168.1.10. Your computer might show something different.

Note: The MAC address is also called Physical Address.

When entering the information using the Access Point’s web-based utility, you will type the 12-digit MAC address in this format, XX:XX:XX:XX:XX:XX without the hyphens for MAC Filtering.

When entering information for MAC Address Cloning, type the 12-digit MAC address.

Corinex ADSL2+ Wireless Gateway G