Corinex Global ADSL2+ manual Installation Overview Connecting to the Adsl Line

Models: ADSL2+

1 145
Download 145 pages 5.69 Kb
Page 15
Image 15

Installation Overview

3.1.2 Connecting to the ADSL Line

To connect the gateway to the ADSL line, please use the supplied telephone cable (RJ11). Plug one end of the cable to the DSL port of the gateway, and plug the other end of the telephone cable into the telephone socket in the wall. If you want to plug a phone in at the same location, you will need to use a POTS splitter.

A POTS Splitter (with built-in Microfilter) is a device that allows you to connect both your telephone cable and telephone set to the same wall socket. At the same time, this splitter helps to eliminate background noise on the telephone line, ensuring the best possible phone performance.

3.1.3 Connecting to the Power Outlet and Powering On

1.Connect the supplied power supply cable to the DC 9V port on the gateway.

2.Plug the power adapter into the electrical outlet.

3.Power on the gateway by toggling the POWER switch into position I.

4.Start up all computers in the network.

3.2 Configuring Your Ethernet Network Card / Installing Your

14

USB Device

 

If your computers are connected to the Ethernet Port of the gateway, proceed with section 3.2.1. If your computer is connected to the gateway’s USB Port, you can skip ahead to section 3.2.2.

3.2.1 Configuring Your Ethernet Network Card

Proceed with this section ONLY if your computer is connected to the Ethernet Port of the gateway.

The following instructions are based on the Windows XP operating system. The configuration procedure may be slightly different on other operating systems. Please refer to the documentation of your operation system for more information about establishing a network connection.

(Instructions are based on default Start menu option)

Corinex ADSL2+ Wireless Gateway G

Page 15
Image 15
Corinex Global ADSL2+ Installation Overview Connecting to the Adsl Line, Connecting to the Power Outlet and Powering On