Corinex Global ADSL2+ manual Following table describes the options of the PVC Settings

Corinex ADSL2+ Wireless Gateway G Configuration

The following table describes the options of the PVC Settings:

Field	Description
PVC	Permanent virtual circuit. A fixed virtual circuit between
	two users: the public data network equivalent of a leased
	line. No call setup or clearing procedures are needed.
VPI	Virtual path identifier
VCI	Virtual channel identifier. 16-bit field in the header of an
	ATM cell. The VCI, together with the VPI, is used to iden-
	tify the next destination of a cell as it passes through to
	the ATM switch. It is sometimes called virtual channel
	connection.
QoS	Quality of Service, a feature of data transmission that
	measures how accurately and how quickly a message or
	data is transferred from a source computer to a destina-
	tion computer over a network. The three QoS options are:
	Undefined Bit Rate (UBR), Constant Bit Rate (CBR),
	and Variable Bit Rate (VBR).
PCR	Peak Cell Rate (in cells/sec) is the cell rate, which the source	43
	may never exceed.
SCR	Sustain Cell Rate
MBS	Maximum Burst Size - traffic parameter that specifies the
	maximum number of cells that can be transmitted at the
	Peak Cell rate.
CDVT	Cell Delay Variation Tolerance
Auto PVC	Auto Permanent Virtual Circuit, see PVC.

DHCP Connection Setup

Dynamic Host Configuration Protocol (DHCP) allows the gateway to automatically obtain the IP address from the server. This option is commonly used in situations where IP is dynamically assigned and is not known prior to assignment.

Use the following procedures to configure the gateway for a DHCP connection.

1.From the Setup main page, click on New Connection. The default PPPoE connection setup is displayed.

Corinex ADSL2+ Wireless Gateway G