SMC Networks 2.4GHz/5GHz manual Advanced Configuration

Advanced Configuration

Note: If you have upgraded system software, then you must reboot the wireless bridge to implement the new operation code.

CLI Commands for Downloading Software from a TFTP Server – Use the copy tftp file command from the Exec mode and then specify the file type, name, and IP address of the TFTP server. When the download is complete, the dir command can be used to check that the new file is present in the wireless bridge file system. To run the new software, use the reset board command to reboot the wireless bridge.

AP#copy tftp file			7-41
1.	Application	image
2.	Config file

3. Boot block image

Select the type of download<1,2,3>: [1]:1 TFTP Source file name:bridge-img.bin TFTP Server IP:192.168.1.19

AP#dir		7-43
File Name	Type	File Size
--------------------------	----	-----------
dflt-img.bin	2	1319939
bridge-img.bin	2	1629577
syscfg	5	17776
syscfg_bak	5	17776
262144 byte(s) available
AP#reset board		7-13
Reboot system now? <y/n>: y

6-37