|
|
|
|
|
| TO CONTROL MULTIPLE PRODUCTS 65 | |||||
22. On Timer Input (Command: f u) | 23. No Signal Power Off (15Min) (Command: f g) |
| |||||||||
Select an external input for the current On Time setting and | Configures the automatic standby settings. | ||||||||||
add a new schedule. |
| Transmission |
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
| ||
Transmission |
| [f][g][ ][Set ID][ ][Data][Cr] | |||||||||
| [f][u][ ][Set ID][ ][Data1][Cr] |
|
| Data | 00: Off | ||||||
|
|
|
|
| |||||||
| [f][u][ ][Set ID][ ][Data1][][Data2][Cr] |
| |||||||||
|
|
| 01: On | ||||||||
Data (Add schedule) |
| ||||||||||
|
|
|
|
|
|
| |||||
70: DVI |
| Acknowledgement |
|
| |||||||
90: HDMI1 |
|
|
| ||||||||
| [g][ ][Set ID][ ][OK/NG][Data][x] | ||||||||||
91: HDMI2/OPS |
|
|
|
|
|
|
| ||||
C0: DISPLAYPORT |
|
|
|
|
|
|
| ||||
Data1 (Read schedule) |
|
|
|
|
|
|
| ||||
1. f1h to f7h (Read data) |
|
|
|
|
|
|
| ||||
F1: Select the 1st schedule input |
|
|
|
|
|
|
| ||||
F2: Select the 2nd schedule input |
|
|
|
|
|
|
| ||||
F3: Select the 3rd schedule input |
|
|
|
|
|
|
| ||||
F4: Select the 4th schedule input |
|
|
|
|
|
|
| ||||
F5: Select the 5th schedule input | 24. Auto Power Off (4 Hours) (Command: m n) | ||||||||||
F6: Select the 6th schedule input | |||||||||||
F7: Select the 7th schedule input | Configures the automatic off settings. | ||||||||||
|
|
|
|
|
| Transmission |
| ||||
ENGLISH
Data2 (Read schedule)
FF
* To read the schedule input, enter FF for [Data2].
If no schedule is available for [Data1] when attempting to read the schedule data, the text ‘NG’ will be displayed and the operation will fail.
(Example 1: fu 01 90 - Move each schedule input down one row and save the 1st schedule input in HDMI mode.) (Example 2: fu 01 f1 ff - Read the 1st schedule input.)
*This function is supported only when 1 (Year/Month/Day),
2 (Hour/Minute/Second), On Time (Repeat Mode/Time) are set.
**It may not be supported depending on the model. Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
[u][ ][Set ID][ ][OK/NG][Data1][Data2][x]
[m][n][ ][Set ID][ ][Data][Cr]
Data | 00: Off |
01:4 hours Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
25.Language (Command: f i) Sets the OSD language.
Transmission
[f][i][ ][Set ID][ ][Data][Cr]
Data | 00: Czech |
| 01: Danish |
| 02: German |
| 03: English |
| 04: Spanish (Europe) |
| 05: Greek |
| 06: French |
| 07: Italian |
| 08: Dutch |
| 09: Norwegian |
| 0A: Portuguese |
| 0B: Portuguese (Brazil) |
| 0C: Russian |
| 0D: Finnish |
| 0E: Swedish |
| 0F: Korean |
| 10: Chinese (Cantonese) |
| 11: Japanese |
| 12: Chinese (Mandarin) |
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
