ENGLISH
66TO CONTROL MULTIPLE PRODUCTS
26. Reset (Command: f k) | 29. Time Elapsed (Command: d l) | |||||||
Performs the Picture and Factory Reset functions. | ||||||||
|
|
|
|
| Checks the elapsed time. | |||
| Transmission |
|
|
|
| Transmission |
|
|
|
|
|
|
|
|
|
| |
| [f][k][ ][Set ID][ ][Data][Cr] |
| [d][l][ ][Set ID][ ][Data][Cr] | |||||
Data | 00: Picture Reset | Data | FF: Read status | |||||
| 02: Initial Settings (factory reset) |
| Acknowledgement | |||||
| Acknowledgement |
|
| [l][ ][Set ID][ ][OK/NG][Data][x] | ||||
|
|
|
|
|
| |||
[k][ ][Set ID][ ][OK/NG][Data][x]
* The data received is shown as a hexadecimal value.
27. Current temperature (Command: d n) | 30. Product serial number (Command: f y) | ||||||||
Checks the inside temperature. | |||||||||
Checks the serial | number of the product. | ||||||||
| Transmission |
|
|
| |||||
|
|
|
|
| Transmission |
|
| ||
|
|
|
|
|
|
|
| ||
| [d][n][ ][Set ID][ ][Data][Cr] |
|
| [f][y][ ][Set ID][ ][Data][Cr] |
| ||||
Data FF: Check the status |
|
| |||||||
Data | FF: Check product serial number | ||||||||
| Acknowledgement |
|
| ||||||
|
|
| Acknowledgement | ||||||
|
|
|
|
|
| ||||
[n][ ][Set ID][ ][OK/NG][Data][x] | [y][ ][Set ID][ ][OK/NG][Data][x] |
|
* Temperature is displayed as a hexadecimal value.
28. Key (Command: m c)
Sends a key code for the IR remote control. Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data IR_KEY_CODE
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
* Data is in ASCII code.
31.Software Version (Command: f z) Checks the software version of the product.
Transmission
[f][z][ ][Set ID][ ][Data][Cr]
Data | FF: Check software version | ||
| Acknowledgement |
|
|
|
|
| |
| [z][ ][Set ID][ ][OK/NG][Data][x] | ||
For key codes, see IR Codes.
*Some key codes are not supported depending on the model.
