MAKING CONNECTIONS 21

Using the Multi Display Mode function

The Multi Display Mode function displays a video signal received from DP In either in single mode (SST: Single Stream Transport) or multi-mode (MST: Multi Stream Transport) through DP Out.

••This function can be configured in the Installation Menu (For more information, refer to the Installation Menu manual.)

••If it is On, the image of each display is displayed in multi-mode.

••If it is Off, the image of each display is displayed in single mode.

••The multi-mode is available in a PC supporting DISPLAYPORT 1.2.

••Multi-mode can connect up to only four monitors. (at the recommended resolution)

••When this function is used, your monitor may not work properly depending on the video card. Reboot the PC after setting the function to Off for stable screen output when not in use.

••In case of using DVI/HDMI Input to DP daisy chain, please set ‘Multi Display mode function’ to off.

ENGLISH

Page 21
Image 21
LG Electronics 42LS75A 49LS75A 55LS75A owner manual Using the Multi Display Mode function