44. DPM Select (Command: f j)
To set the DPM (Display Power Management) function. Transmission
[f][j][ ][Set ID][ ][Data][Cr]
Data | 00: Off |
| 01: 5 seconds |
| 02: 10 seconds |
| 03: 15 seconds |
| 04: 1 minutes |
| 05: 3 minutes |
| 06: 5 minutes |
| 07: 10 minutes |
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
45.Remote Control/Local Key Lock (Command: k m) Adjusts the remote control/local key (front) lock.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 00: Off (Lock Off)
01:On (Lock On)
*When the remote control and front keys are locked in Standby mode, you cannot turn on the power on by using the remote control or front power button. Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
46. Power On Delay (Command: f h)
Sets the schedule delay when the power turns on. (unit: seconds).
Transmission
[f][h][ ][Set ID][ ][Data][Cr]
Data 00 to FA: min. 0 to maximum 250 (seconds) Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x
TO CONTROL MULTIPLE PRODUCTS 69
47.Fail Over Select (Command: m i) Selects an input mode for auto switch.
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
Data | 00: Off |
| 01: Auto |
| 02: Manual |
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
48.Fail Over Input Select (Command: m j) Selects an input source for auto switch.
*This command is only available when the Fail Over (auto) mode is set to Custom.
Transmission
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr][ ] [Data4][ ][Data5][Cr]
Data 1 to 4 (Input priority: 1 to 4)
70:DVI
90:HDMI1
91:HDMI2/OPS
C0: DISPLAYPORT
Acknowledgement
[j][ ][SetID][ ][OK/NG][Data1][Data2][Data3][Data4] [ ][Data5][x]
Data 1 to 4 (Input priority: 1 to 4)
70:DVI
90:HDMI1
91:HDMI2/OPS
C0: DISPLAYPORT
49.IR Operation (Command: t p)
Configures the IR operation settings of the product. Transmission
[t][p][ ][Set ID][ ][Data][Cr]
Data | 00: locks off all of the keys |
| 01: locks on all of the keys except the Power key |
| 02: locks on all of the keys |
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
