|
| ASSEMBLY AND PREPARATION 9 | ||
Connecting IR & Light Sensor |
|
| ||
| Using Kensington Lock |
| ||
When you connect the cable to the product, | The Kensington security system connector is | |||
the feature for receiving remote control signals | located at the back of the monitor. For more | |||
is activated. The IR & light sensor is magnetic. | information on installation and use of this | |||
Attach it to the front edge of the product for use. | system, refer to the manual provided with the | |||
| Kensington security system or visit http://www. | |||
[Front] | kensington.com. | |||
|
|
|
| |
| Connect the Kensington security system cable | |||
| between the monitor and a table. | |||
ENGLISH
PIXEL
SENSOR 3.3V ___ 0.25mA
IR&LIGHT SENSOR
CAUTION 
CAUTION
Portrait Layout
When installing in a portrait layout, rotate the monitor counterclockwise 90 degrees (when facing the screen).
NOTE
••The Kensington security system is optional. You can obtain additional accessories from most electronics retail stores.
