USER SETTINGS 39
To Run a sound test
Remote Control (SETTINGS) | Sound Sound Test |
Run a sound test to check that sound signals are outputted normally, then solve any problems by selecting the relevant option on the screen. If there are no problems with the Sound Test, check connected external devices.
ENGLISH
Network Settings
To Set a Signage Monitor Name
Remote Control (SETTINGS) | Network Signage Name |
You can set a name for Signage Monitor that will be used on the network by using the
To Set Your Network |
|
|
Remote Control (SETTINGS) | Network | Wired Connection (Ethernet) |
••Connecting to a wired network: connect the display to a Local Area Network (LAN) via the LAN port as shown in the following illustration and set up the network settings. Only wired network connections are supported. After making a physical connection, a small number of networks may require the display network settings to be adjusted. For most networks, the display will automatically make a connection without any adjustments. For detailed information, contact your Internet provider or consult your router manual.
Setting a Wireless Network |
|
Remote Control (SETTINGS) | Network |
If you have set the monitor up for a wireless network, you can check and connect to the available wireless Internet networks.
••Add a Hidden Wireless Network: If you input the name of network directly, you can add a wireless network.
••Connect via WPS PBC: Connects easily when the button of a wireless AP supporting PBC is pressed.
••Connect via WPS PIN: Connects easily when the PIN of the wireless AP that you wish to connect to is entered in to the AP configuration webpage.
••Advanced Settings: If you input the information of network directly, you can enter a wireless network. If there is no wireless network available, click Advanced Settings. You can add a network.
