70TO CONTROL MULTIPLE PRODUCTS
ENGLISH
50. Local Key Operation (Command: t o)
Configures the local key operation settings of the product. Transmission
[t][o][ ][Set ID][ ][Data][Cr]
Data | 00: locks off all of the keys |
| 01: locks on all of the keys except the Power |
| key |
| 02: locks on all of the keys |
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
51. Status (Command: s v)
Checks the current signal status of the product. Transmission
[s][v][ ][Set ID][ ][Data][ ][FF][Cr]
Data | 02: checks whether there is a signal or not |
10:RGB sensing OK/NG (Check Screen) Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][Data1][x]
Data: | 02 (when a signal is found) |
Data1 | 00: no signal |
| 01: there is a signal |
Data: | 10 (Check Screen) |
Data1 | 00: Check Screen result NG |
07:Check Screen result OK
*Treated as NG if Check Screen is set to Off
52.Check Screen (Command: t z) Sets Check Screen.
Transmission
[t][z][ ][Set ID][ ][Data][Cr]
Data | 00: Off |
01:On Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
53.Speaker (Command: d v) Sets the speaker function.
Transmission
[d][v][ ][Set ID][ ][Data][Cr]
Data | 00: Off |
01:On
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][x]
54. Daylight Saving Time (Command: s d)
To set theDaylight Saving Time function. Transmission
[s][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][ ][Data4] [ ][Data5][Cr]
Data | 00: Off (Data2~5: FFH) |
| 01: Start Time |
| 02: End Time |
Data2 01~0C: January to December
Data3 01~06: 1 ~ 6th week
*The maximum number of [Data3] differs depending on Date.
Data4 00~06 ( Sun. ~ Sat. ) Data5 00~17: 00 ~ 23 hours
*To read the Start Time/End Time, enter FFH for [Data2]~[Data5].
(ex1: sd 01 01 ff ff ff ff - To check the Start Time
ex2: sd 01 02 ff ff ff ff - To check the End Time)
*This function is supported only when 1 (Year/Month/ Day) and 2 (Hour/Minute/Second) are set. Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][Data4] [Data5][x]
**It may not be supported depending on the model.
