LG Electronics 42LS75A 49LS75A 55LS75A owner manual Connecting the OPS

10ASSEMBLY AND PREPARATION

ENGLISH

Connecting the OPS

-For certain models only.

-The image may be different according to the model.

1Lay a clean cloth on the floor, put the monitor on it with the screen facing downward, and then remove the screws from the OPS hole cover on the rear of the monitor with a screwdriver.

3Align the KT-OPSA along the four screw holes on the rear of the set and attach it to the rear of the set using the four screws provided.

KT-OPSA

4 Open the top cover of the KT-OPSA and connect the cable provided to the connector inside the set and the connector on the KT- OPSA.

OPS Hole Cover

2 Lift the left side (round part) of the OPS hole cover. Remove the cover.

Connector on
the KT-OPSA	Connector inside the set