CK Electric Part C3000 manual Default Action if No Answer to Telephone

•Default Action if No Answer to Telephone

You set this option to Receive if you want the MultiPASS C3000 to handle an incoming call, detected as a telephone call that is not answered, as an incoming fax. If no fax is received, the line is then disconnected. If you set this option to Disconnect, the MultiPASS C3000 automatically disconnects the unanswered call, without switching to try and receive a fax.

❍Answering Machine Mode Options

You select this option to set the MultiPASS C3000 to automatically switch to fax receive mode if your telephone caller does not speak within the specified amount of time.

You can set the number of seconds (1-99) the MultiPASS C3000 will wait before switching to fax receiving mode if the telephone caller does not speak.

❍Remote

You select the Receive option so that you can receive a fax by pressing an ID code on the telephone attached to the MultiPASS C3000. You assign a remote Identification Number (00-99) that signals the MultiPASS C3000 to receive the fax. The default number is 25.

❍DRPD Switch Options

If you select DRPD for the Receive Mode, you need to set up the Ring Pattern, Action, Fax ID, and Fax Number. See the DPRD description starting on page 5-8 for complete details on how these settings work with your MultiPASS C3000.

8-10 Setup and Other Utilities in the Desktop Manager Chapter 8