Nortel Networks 207344-B manual Default Port Configuration

Using the Centillion EtherSpeedII Switch Modules

Default Port Configuration

The EtherSpeedII 10/100BASE-T switch module is shipped preconfigured with the factory default settings listed in Table 2-1.

Table 2-1. Factory Default Settings for the 10/100BASE-T Switch Module

Parameter	Factory Default	Configurable Options
Switching mode	Transparent	Transparent
Spanning Tree Protocol	None	None, IEEE
Port state	Enable	Enable/Disable
Filters	Disable (none)	Enable/Disable
Port speed	Auto	Auto/10/100
Connection Mode	Auto	Auto/HDX/FDX
Spanning tree group	2	2–32
Priority	128	0–255
Path cost	10	1–65535

The EtherSpeedII 100BASE-FX switch module is shipped preconfigured with the settings listed in Table 2-2.

Table 2-2. Factory Default Settings for the 100BASE-FX Switch Module

Parameter	Factory Default	Configurable Options
Switching mode	Transparent	Transparent
Spanning Tree Protocol	None	None, IEEE
Port state	Enable	Enable/Disable
Filters	Disable (none)	Enable/Disable
Spanning tree group	2	2–32
Full/half-duplex setting	FDX	HDX/FDX
Priority	128	0–255
Path cost	10	1–65535

2-10 207344-B