Nortel Networks 207344-B manual Figures

Figures

Figure 1-1.	EtherSpeedII Switch Modules in a Network Center	1-2
Figure 1-2.	EtherSpeedII 10/100BASE-T 20-Port Switch Module	1-4
Figure 1-3.	EtherSpeedII 100BASE-FX 16-Port Switch Module	1-5
Figure 1-4.	LEDs on the EtherSpeedII 10/100BASE-T Switch Module	1-6
Figure 1-5.	LEDs on the EtherSpeedII 100BASE-FX Switch Module	1-6
Figure 2-1.	Network Example	2-3
Figure 2-2.	Connecting Servers to Dedicated Ports	2-4
Figure 2-3.	Replacing a Bridge	2-5
Figure 2-4.	Desktop Switch with ATM Uplinks	2-6
Figure 2-5.	Segment Switch in an Enterprise Network	2-7
Figure 2-6.	Desktop Switch and Frame-to-Cell Converter	2-8
Figure 2-7.	MultiLink Trunking Example	2-9
Figure 3-1.	Removing the Filler Panel	3-3
Figure 3-2.	Inserter/Extractor Levers Ready for Installation	3-3
Figure 3-3.	Slot Module Guides	3-4
Figure 3-4.	Inserting the Module Until It Engages the Backplane	3-4
Figure 3-5.	Seating the Module	3-5
Figure 3-6.	LED Display for the 10/100BASE-T switch module	3-6
Figure 3-7.	LED Display for the EtherSpeedII 100BASE-FX Switch Module	3-7
Figure 3-8.	Disengaging the Module	3-9
Figure 3-9.	Removing the Module from the Centillion 50/100 Chassis	3-10
Figure B-1.	MDI-X Internal Crossover (RJ-45 Example)	B-2
Figure B-2.	MDI-X to MDI-X External Crossover (RJ-45 Example)	B-3
Figure B-3.	MT-RJ Connector	B-4
Figure B-4.	10BASE-T/100BASE-TX Ethernet UTP Crossover Cable	B-5
Figure B-5.	Fast Ethernet Type 1 Balun Media Adapter	B-7
Figure C-1.	LED Display for the EtherSpeedII 10/100BASE-T Switch Module	C-1
Figure C-2.	MT-RJ LEDs for the EtherSpeedII 100BASE-FX Switch Module	C-3

207344-B xi