Nortel Networks 207344-B manual Remove the filler panel

Installing the EtherSpeedII Switch Modules

To install and secure the module in the chassis:

1.Remove the filler panel.

Using the medium flat-tip screwdriver, loosen the two captive retaining screws on the filler panel until they pop free of the chassis. Rotate the left and right inserter/extractor levers away from the center of the filler panel to their protruding positions and remove the filler panel (Figure 3-1).

6463

Figure 3-1. Removing the Filler Panel

2.Make sure the module inserter/extractor levers are protruding forward (Figure 3-2).

6464

Figure 3-2. Inserter/Extractor Levers Ready for Installation

207344-B 3-3