Nortel Networks 207344-B Installing the EtherSpeedII Switch Modules, Preparing for Installation

Chapter 3 Installing the EtherSpeedII Switch Modules

This chapter explains how to install and connect the EtherSpeedII 10/100BASE-T switch module or the EtherSpeedII 100BASE-FX switch module, and includes the following information and procedures:

•Preparing for installation (this page)

•Installing a switch module (page 3-2)

•Checking LEDs to verify the installation (page 3-6)

•Connecting cables to Model # ports (page 3-8)

•Removing a switch module (page 3-8)

Preparing for Installation

Before you install the EtherSpeedII 10/100BASE-T switch module or the EtherSpeedII 100BASE-FX switch module, make sure that the Centillion 50/100 chassis is assembled and ready to accept modules. For more information, refer to Installation and Reference for the Centillion 50 and 100 Chassis.

You need the following tools and materials for installation:

•Medium flat-tip screwdriver for the captive retaining screws

•Grounded antistatic mat and wrist strap

207344-B 3-1