CK Electric Part C3000 manual Cartridge holder moves to the center of the unit, Open

If you are using the BC-21 Color BJ Cartridge and your output is blank, one of the BJ tanks is probably out of ink. See the instructions starting on page 9-14 for replacing a BJ tank.

The following procedure describes how to replace the BC-21 Color BJ Cartridge with the optional BC-20 Black BJ Cartridge. Follow the instructions in this section to replace an old BJ cartridge or to change BJ cartridges when you are switching between the BC-21 and any of the optional BJ cartridges.

You only need to replace the BC-21 Color BJ Cartridge when the print head is damaged (or after printing approximately 2000 pages). If one of the BJ tanks (either color or black) in your BC-21 Color BJ Cartridge is out of ink, see the next section (page 9-14) for instructions on how to replace a BJ tank.

To replace the BJ cartridge, follow these steps:

1

Press the

CARTRIDGE button.

CARTRIDGE

The cartridge holder moves to the center of the unit.

2

Open the	❍ Grasp both sides and lift it up.
printer cover.

DO NOT TOUCH THE

RIBBON CABLE

DO NOT TOUCH THE

GUIDE RAIL

DO NOT TOUCH THE

ROUND SHAFT

9-10 Maintaining the MultiPASS C3000 Chapter 9