CK Electric Part C3000 manual LCD Messages, Information Messages, Message Error Code Cause Action

LCD Messages

The following messages are displayed in the LCD when the MultiPASS C3000 is performing a function or encounters an error. The Error Code appears on the Activity Report.

Information Messages

Message Error Code Cause Action

AUTO REDIAL	—	The MultiPASS is
		waiting to redial the
		other party’s number
		because the line was
		busy or the other
		party did not answer
		when you tried to send
		the document.

Wait for the MultiPASS to try redialing. If that doesn’t work, wait until the MultiPASS starts to dial the number, then press STOP to cancel redialing. Try to send the document again at a later time.

COMMUNICATING PLEASE WAIT

DIALING

DOCUMENT READY

ECM RX

ECM TX

HANG UP PHONE

—You tried to send a fax using Manual mode when the MultiPASS was already sending a fax from memory.

—The MultiPASS is dialing the receiving fax machine.

—The document in the Automatic Document Feeder is ready for faxing, copying, or scanning.

—The MultiPASS is receiving a fax using ECM.

—The MultiPASS is sending a fax using ECM.

—The telephone is off hook.

Wait until the fax is sent, or use memory sending.

Press STOP if you want to cancel the transmission.

Send the fax, make a copy, or scan the document.

ECM transmissions may take longer than normal transmissions. Turn off ECM if you need to receive quickly, or if you know your local lines are in good condition.

ECM transmissions may take longer than normal transmissions. Turn off ECM if you need to transmit quickly, or if you know your local lines are in good condition.

Place the telephone properly into its cradle.

10-6 Troubleshooting Chapter 10