CK Electric Part C3000 manual When you open Windows, To close the MultiPASS Background in Windows

	When you installed the Desktop Manager, the MultiPASS Background
	was placed in the Windows StartUp group and is automatically opened
	when you open Windows.
	If you decide you need to disconnect the MultiPASS C3000 from the
	designated port and/or attach another device to the port, you should
	close the MultiPASS Background first. If you close the MultiPASS
	Background first, you avoid receiving error messages when the
	MultiPASS Background detects it can no longer communicate with the
	MultiPASS C3000.
	When you start the Desktop Manager again at a later time, the
	MultiPASS Background is automatically reopened if your MultiPASS
	C3000 has been reconnected to the port. You can also open the
	MultiPASS Background without opening the Desktop Manager.
N
	If you are closing the MultiPASS Background, you may want to set the
	MultiPASS C3000 to print any received faxes. With the MultiPASS
	Background closed, received faxes cannot be moved to the Desktop
	Manager. Received faxes can also be stored in the MultiPASS C3000
	memory. However, if the memory becomes full, the MultiPASS C3000 is
	unable to receive more faxes until you print the faxes stored in memory.
	To close the MultiPASS Background in Windows 95:
	1. Close the MultiPASS Desktop Manager.
	2. On the Windows taskbar, click the right mouse button on the
	MultiPASS Background button. In the displayed menu, click Close.
	To close the MultiPASS Background in Windows 3.1x:
	1. Close the MultiPASS Desktop Manager.
	2. On the Windows desktop, click the left mouse button on the
	minimized MultiPASS Background icon. In the displayed menu,
	click Close.
	Do not delete the MultiPASS Background icon from the Canon
	MultiPASS C3000 group.

8-18 Setup and Other Utilities in the Desktop Manager Chapter 8