CK Electric Part C3000 Speed, Ink Saver Mode, Ring Time, Ring Tone You set the tone of the ring

❍Speed

You set the transmission speed used to receive faxes. The higher the setting, the faster the fax is received. If you experience problems when receiving faxes, try a lower speed setting.

❍Error Correction (ECM)

You select this option to reduce system and line errors when receiving a fax. With this option selected, the system checks each incoming fax for lost data. If data has been lost from a portion of a page, the system receives that portion again after confirming that all data within that portion can be received successfully.

❍Ink Saver Mode

You select this option to print documents in the Desktop Manager using a reduced amount of ink. When using Ink Saver Mode, the print document may appear less bright or contrasted.

❍Fax/Telephone Switching Options

You specify these options when your Receive Mode is Fax/Telephone Switching.

•Listen Time before Ringing

When a call is received, the MultiPASS C3000 checks to see if the call is from a fax machine or a telephone. You use this option to set the appropriate amount of time (0-30 seconds) to allow the MultiPASS C3000 to check for the type of call. If your MultiPASS C3000 does not have enough time to detect the fax tone, it assumes the call is from a telephone.

•Ring Time

When your MultiPASS C3000 is set to receive both fax and telephone calls (FaxTel mode), it rings to inform you of an incoming telephone call. You use this option to set the appropriate amount of time (10-45 seconds) the MultiPASS C3000 will ring. If you do not pick up the telephone within a certain amount of time, the MultiPASS C3000 stops ringing.

•Ring Tone

You set the tone of the ring.

Setup and Utilities Desktop Manager

Chapter 8 Setup and Other Utilities in the Desktop Manager 8-9