CK Electric Part C3000 manual To Coated Paper

Problem	Cause	Solution
Colors print incorrectly	The MultiPASS printer	Make sure the MultiPASS
	driver may not be selected.	is the default printer in your
		application.

The driver may not be selecting color.

Check that you selected Color in the Color Model dialog box in the Graphics tab of the printer driver.

Colors are missing	The print head may need to	Clean the print head (see
	be cleaned.	page 9-6).
Colors in a line are	The print settings may not	If you are printing high
uneven or different	be the best for the images	density color graphics on
from previous lines	you are printing.	plain paper, change the Media
		Type setting from Plain Paper
		to Coated Paper.
		Be sure to experiment with
		different settings and different
		types of paper.
Blue looks like purple	Blue prints out as purple	Within the MultiPASS printer
	because of the difference in	driver, selecting Match (screen
	color technology used by	match) in the Color
	Adjustment
	the screen and printer; the	dialog box of the Custom
	Setting
	screen uses RGB (Red, Green,	window will result in a lighter
	Blue) color and the MultiPASS	blue. If you are not using
	uses CMYK (Cyan, Magenta,	screen matching, decreasing
	Yellow, Black) color. Due to the	the amount of magenta by 30%
	technology differences, when	produces a royal blue.
	cyan and magenta are mixed
	together, blue prints dark blue	If you are just looking for a
	or purple compared to the screen.	nice blue color, try cyan. It
		prints beautifully and fast
		and is available in almost all
		applications that support color.

Color images are	Check to see if your MultiPASS
missing some detail	printer driver is set to Plain
	Paper, Color Mode, and
	Halftoning=Pattern.

If so, change the Media Type setting from Plain Paper to Coated Paper.

The printout curls	Your pages may include a
	large amount of ink.

Remove each sheet as it is printed. Allow it to dry, then roll it in the opposite direction of the curl.

10-16 Troubleshooting Chapter 10