CK Electric Part C3000 manual Is full

Message Error Code Cause Action

MEMORY FULL	—	The MultiPASS is
PLEASE WAIT		sending or receiving
		a fax and its memory
		is full.

If sending a fax, the MultiPASS continues to send the fax as memory becomes available.

If receiving a fax, the MultiPASS continues to print after the error is cleared (BJ cartridge is replaced or paper is added).

MEMORY USED nn%	—	Shows the percentage of	If you need more space,
		memory currently in use. print or send any
			documents in memory.
NO ANSWER	#005	The receiving fax	Make sure you dialed
		machine does not	the correct number.
		answer.	Try again later.
PLEASE WAIT	—	The MultiPASS is	Wait until the date and
		warming up.	time appear in the LCD
			display, then begin.
RECEIVED IN FILE	—	The computer was	Turn the computer on
		off and a document	to upload the file to the
		was received in the	Desktop Manager or
		memory of the	press FUNCTION then
		MultiPASS.	select FILE PRINT from
			the menu to print the
			document.

REC’D IN MEMORY

STOP KEY PRESSED

—The paper or ink ran out, or a paper jam occurred, so the MultiPASS received the document in memory.

—You pressed the STOP button to cancel the current operation.

Add paper to the sheet feeder, change the

BJ cartridge, or clear the paper jam. Press STOP to clear the error message. The MultiPASS automatically prints the document stored in memory.

Resume operation.

TALK	—	The MultiPASS is set	Answer the call.
		for Fax/Tel mode and
		you are receiving a
		telephone call.
TX/RX CANCELLED	—	You pressed STOP to	Try sending again.
		cancel the transmission.
TX/RX NO. nnnn	—	When the MultiPASS	Write the number down
		sends or receives a fax,	if you’ll need it later.
		it assigns it a unique
		identification number.

Troubleshooting

Chapter 10 Troubleshooting 10-7