JVC RX-772VBK manual Specifications, Amplifier, Video

Specifications

Amplifier

Output Power At Stereo operation

110 watts per channel, min. RMS, both channels driven into 8 ohms, 20 Hz to 20 kHz with no more than 0.06 % total harmonic distortion.

	At Surround operation
	Front Channels	110 watts per channel, min. RMS, driven into 8 ohms at 1 kHz
		with no more than 0.8 % total harmonic distortion.
	Center channel	110 watts, min. RMS, driven into 8 ohms at 1 kHz, with no more
		than 0.8 % total harmonic distortion.
	Rear channels	110 watts, min. RMS, driven into 8 ohms at 1 kHz, with no more
		than 0.8 % total harmonic distortion.
Total Harmonic Distortion		0.06 %* at 110 watts output
(8 ohms, 1 kHz)		(* Measured by JVC Audio Analysis System)
Audio Input Sensitivity/	PHONO (MM)	2.5 mV/47 k ohms
Impedance (1 kHz)	CD, TAPE, TV SOUND, VCR,	230 mV/47 k ohms
	VIDEO
Audio Output Level	TAPE, VCR	230 mV
Signal-to-Noise Ratio	PHONO	70 dB/78 dB (at REC OUT)
(’66 IHF/’78 IHF)	CD, TAPE, TV SOUND, VCR,	87 dB/80 dB
	VIDEO
Frequency Response (8 ohms)	PHONO	20 Hz to 20 kHz (±1 dB)
	CD, TAPE, TV SOUND, VCR,	20 Hz to 20 kHz (±1 dB)
	VIDEO
RIAA Phono Equalization		±0.5 dB (20 Hz to 20 kHz)
Loudness Control		+6 ±1 dB at 100 Hz
(Volume Control at –40 dB)		+4 ±1 dB at 10 kHz
S.E.A.	Center Frequencies	100 Hz, 1 kHz, 10 kHz
	Control Range	±10 dB ±2 dB

Video

Video Input Sensitivity/Impedance	VCR, VIDEO	1 Vp-p/75 ohms
Video Output Level	VCR, MONITOR OUT	1 Vp-p/75 ohms
Synchronization		Negative
Signal-to-Noise Ratio		45 dB
On-Screen Color System		NTSC

Page 47